Grain Systems PNEG-365 - Manual (Page 36)

Grain Systems, Inc. Assumption, Ill.
36
18' Manual Batch
2
3
1
11
10
6
4
IMPORTANT: Position support
as shown for proper fit.
Before assembly of any platform, read the entire instructions to assure proper placement and assembly.
Refer to Figure #41 for proper location of access door platform. Begin by assembling the access door platform support
frame using 5/16" x 3/4" truss head bolts and nuts. When attaching platform vertical support to bin sidewall field drill
(16) 3/8" diameter holes for each support spaced every 4". Be sure and use 5/16" x 3/4" bin bolt on vertical support
to sidewall. Special attention should be taken when assembling the platform support that the support brace is placed
correctly.
Now proceed to the platform floor. Align holes on platform floor with holes on platform support and bolt together
using 5/16" x 3/4" truss head bolt and nuts. Next, assemble handrail posts, handrails, and handrail braces.
ACCESS DOOR PLATFORM
8
13
&
5
7
5
11th hole
Platform Support
TDP-5009
Figure #42
Key Part No. Description Quantity Weight
1 LS-371 Platform Vertical Angle 42" 3 11.38
2 TDP-5000 Handrail 59" 2 10.15
3 TDP-5002 Handrail 30" 2 10.15
4 TDP-5003 Handrail Brace 36.29/32" 2 6.34
5 TDP-5005 Floor Brace 58.1/2" 3 26.11
6 TDP-5006 Platform Floor 37.7/8" 2 38.23
7 TDP-5007 Support Brace 50.21/32" 2 15.08
8 TDP-5008 Sidewall Brace 58" 2 19.65
9 TDP-5009 Platform Support 43.1/2" 2 12.95
10 TDP-5010 Platform Floor Splice 37.1/2" 1 6.24
11 TDP-5011 Platform Toe Plate 29.3/4" 1 3.29
12 TDP-5014 Access Door Package Hardware 1 5.41
13 TDP-5008N Sidewall Brace 2.66" 2 16.61
REV. 9-30-96
7th hole
3rd hole
9