Grain Systems PNEG-365 - Manual (Page 17)

17
Grain Systems, Inc. Assumption, Ill.
18' Manual Batch
Figure #15
REV. 1-25-96
CAULKING DETAIL
Before bolting the sidewall sheets together, check that you have the
proper gauge steel for the first ring. The higher gauge numbers denote
the thinner materials. (For example: 20 gauge material is thinner than
14 gauge.) In erecting Top Dry grain bins the thinnest material always
goes on top. The first sidewall ring you assemble will be the second
ring from the top of your bin. Check the various gauges of your bin
with the Color Code Chart and begin building accordingly.
Once you have selected the proper gauge material, begin assembling
the sidewall sheets according to the instructions on the following page.
- For bolting specifications on stiffeners, see Figure #11.
Note: The rope caulking is installed before each sheet is assembled.
Apply rope caulking between the last vertical row of bolts and edge of
outside sheet. There is sufficient caulking for all vertical seams on
storage and drying bins. Wipe sheet clean where caulking is to be
applied.
9.3/8" (23.813 cm)
Standard
Caulking
9.3/8" (23.813 cm)
Standard Sidewall Sheets
As Viewed From Outside
GAUGE COLOR CODE
22 White
20 Red
19 Black/Yellow
18 Orange
17 Pink/Light Blue
16 Blue
15 Brown/Red
14 Green
13 Yellow/Blue
12 Black
11 Pink
10 Light Blue
9 Blue/Orange
8 Yellow