Grain Systems PNEG-365 - Manual (Page 7)

7
Grain Systems, Inc. Assumption, Ill.
18' Manual Batch
REV. 9-28-96
This bolt is used to connect horizontal and vertical seams for 13 gage and thinner sidewall sheets to each
other, and to bolt the stiffeners to the sidewall sheets. It is also used in attaching roof panels to the top
sidewall sheet and attaching roof panels and flashing to the center collar.
REFER TO TOP DRY TANK BOLTING REQUIREMENTS
FOR COMPLETE BOLT USAGE
Figure #6
.950"
.750"
TOP VIEW SIDE VIEW
S-275
GRADE 5
.3125" x .750" pre-assembled with a steel backed neoprene washer.
1.250"
1.437"
This bolt is primarily used to connect roof panels together where they overlap. It is also used at the bottom
of the flat bottomed bins to attach the base angle to the sidewall sheet. A small number of these are pro-
vided for joints and FC-42076 splice plates for the stiffeners to sidewall connection.
.3125" x 1.250" pre-assembled with a steel backed neoprene washer.
S-277
SIDE VIEW TOP VIEW
GRADE 5