Figure #46, Perforated center band – Grain Systems PNEG-365 User Manual
Page 40
Advertising
Grain Systems, Inc. Assumption, Ill.
40
18' Manual Batch
Measure down 24.1/2"
from first hole in roof
sheet and drill hole for
band clip.
TD-100107
Top Band Clip
(6) Equally spaced
TD-100545
(3) Perforated Band
Figure #46
Roof Sheet
PERFORATED CENTER BAND
Drill (6) 3/8" diameter holes equally spaced as shown above for top band clips. Attach clips using 5/16"
x 3/4" bin bolts. Add perforated band sections. Note that these do not attach to the leveling bands but
hang down on the inside of the top inner leveling band.
REV. 9-30-96
Advertising