Grain Systems PNEG-365 User Manual
Page 20
Advertising
Grain Systems, Inc. Assumption, Ill.
20
18' Manual Batch
"C" CHANNEL INSTALLATION
Fasten the rolled "C" eave members to the wall brackets in the upper 2 holes of the top set of three (3) holes leaving
the bolts loose.
Install the splice plates at the rolled "C" eave member seams using 3/8" x 1" flanged hex bolts and nuts. Install bolts
as shown below. Tighten all bolts.
"C" Channel Attachment.
Figure #20
REV. 9-30-96
TD-100763
Eave "C" Channel
TD-100763
Eave "C" Channel
TD-100688
Eave Splice
Advertising