Xylem HYDROVAR Smart - Manual (Page 11)

11
3.2.2 Included Component
Æ
1 x HYDROVAR-Smart print
Æ 1 x Display unit
Æ 1 x Display-sealing
Æ 1 x Front cover
Æ 1 x Protection cover
Æ 1 x Label (SCH 60.25)
Æ 1 x Label (SCH 60.35)
Æ 4 x Distance bolt M4xM4x22 I/I
Æ 4 x Distance bolt M4xM4x8 A/I
Æ 4 x Screw M3x10
Æ 4 x Screw M4x10
Æ 4 x Screw M4x6
Æ 8 x Washer M4
3.3 Explosion drawing
The self-adhesive label SCH 60.25 (with the cut-out for the display) has to be fixed in this
way, that the yellow areas are placed on top of the push buttons.
The self-adhesive label SCH 60.35 has to be fixed below the display unit.
A photo of the right place for these labels is shown on the first page of this instruction
manual!
M4x10
Washer M4
Protection cover HYDROVAR-
Smart print
Display-sealing
Front cover
Display unit
M3x10
Distance boltM4xM4x22 I/I
Distance bolt M4xM4x8 A/I
Washer M4
M4x6