Xylem HYDROVAR Smart - Manual (Page 28)

28
7.20.2 1 st Offset level
LEVEL 1
XX.X %
The level 1 is the start level of the 1 st Offset.
(adjustable between 0 and 100% of the additional
analogue input).
Press ¾ on the Hydrovar-Smart to change to
7.20.3 2 nd Offset level
LEVEL 2
XX.X %
The level 2 is the start level of the 2 nd Offset.
(adjustable between 0 and 100% of the additional
analogue input).
Press ¾ on the Hydrovar-Smart to change to
7.20.4 INTENSITY 1
INTENSITY 1
+XX.X %
This is the intensity of the 1 st Offset of the required
value at the zero point of the second analogue input
Settings: -200% up to +200% of the sensor range.
Press ¾ on the Hydrovar-Smart to change to
7.20.5 INTENSITY 2
INTENSITY 2
+XX.X %
This is the intensity of the 2 nd Offset of the required
value at the maximum point of the second analogue
input.
Settings: -200% up to +200% of the sensor range.
To leave the submenu press the ¾ longer than 3 sec. to change to
S U B M E N U
Offset