YSI 5200 - Manual (Page 116)

YSI Incorporated 114 5200 Recirculating System Monitor
3. After cleaning, check the response and accuracy of the conductivity cell with a calibration
standard.
NOTE: If this procedure is unsuccessful, or if sensor performance is impaired, it may be necessary to
return the sensor to a YSI authorized service center for service, Refer to Section 14 WARRANTY
AND SERVICE INFORMATION.
The temperature portion of the sensor requires no maintenance.
11.5 Recommended cleaning of the 5200 Monitor and
Accessories
Clean the 5200 Monitor and accessories as needed. Dampen a cloth with warm water and wipe the outside
of the unit. You may use mild detergent with water, if necessary. Do not use acid-based, alkali-based or
organic solvent-based solvents (e.g., acetone, alcohol, etc.).