YSI 5200 - Manual (Page 129)

YSI Incorporated 127 5200 Recirculating System Monitor
Setting Factory Default Value Your Value
pH Low Control Relay Disabled
pH High Alarm 8.00
pH High Alarm Relay Disabled
pH Low Alarm 6.00
pH Low Alarm Relay Disabled
pH Dose Up Time 5 Minutes
pH Dose Up Wait 15 Minutes
pH Dose Down Time 30 Seconds
pH Dose Down Wait 15 Minutes
pH Alarms No
Parameters—Salinity
Salinity Enabled
Parameters—Temperature
Temperature Enabled
Temperature Set Point 25°C
Temperature High Control 26°C
Temperature High Control Relay Disabled
Temperature Low Control 24°C
Temperature Low Control Relay Disabled
Temperature High Alarm 26.5°C
Temperature High Alarm Relay Disabled
Temperature Low Alarm 23.5°C
Temperature Low Alarm Relay Disabled
Temperature Units Centigrade
Temperature Alarms No
Pager
Pager Disabled
Pager Phone Number —
Pager Delay 10 Sec
Pager Retries 3 Minutes
Pager Retransmit 10 Minutes
Pager Tone/Pulse Tone
Timers
Alarm Hold Off Enabled
Alarm Hold Off Time 15 Seconds
Feed Timer Disabled
Feed Timer Feed Days NNNNNNN
Feed Timer Start Date Power on date
Feed Timer End Date Power on date
Feed Timer Feed Mode Timed