YSI 5200 - Manual (Page 29)

YSI Incorporated 27 5200 Recirculating System Monitor
Section 4. Probe Module
Probe Module covers the following:
Ö Unpacking the Probe Module
Ö Features of the YSI 5561 Probe Module
Ö Features of the YSI 5562 Probe Module
Ö Preparing the YSI 5561 Probe Module
Ö Preparing the YSI 5562 Probe Module
Ö Membrane Cap Installation
Ö Calibration/Storage Cup (5562 only)
Ö Instrument/Cable Connection
Two different probe modules are available for the YSI 5200 Recirculating Monitor. The YSI 5561 Probe
module is used for measuring dissolved oxygen and temperature only, while the YSI 5562 Probe module
is used for measuring dissolved oxygen, temperature, conductivity, and optional pH or pH/ORP. A 4, 10
or 20 meter cable is directly connected to the probe module body making it waterproof.
4.1 Unpacking the Probe Module
1. Remove the Probe module from the shipping box(es).
NOTE: Do not discard any parts or supplies.
2. Use the packing list to ensure all items are present.
3. Visually inspect all components for damage.
NOTE: If any parts are missing or damaged, contact your YSI Service Center immediately. Refer
to Section 14 WARRANTY AND SERVICE INFORMATION or www.ysi.com/environmental.
4.2 Features of the YSI 5561 Probe Module
Figure 4-1 5561 Probe Module