YSI 5200 - Manual (Page 128)

YSI Incorporated 126 5200 Recirculating System Monitor
Setting Factory Default Value Your Value
Conductivity Alarms No
Parameters—DO
DO Enabled
DO Interval Continuous
DO Range Auto
DO Units mg/L
DO Membrane Type Teflon
DO Set Point 8.30
DO High Control #1 8.50
DO High Control #1 Relay Disabled
DO High Control #2 8.70
DO High Control #2 Relay Disabled
DO Low Control #1 8.10
DO Low Control #1 Relay Disabled
DO Low Control #2 7.90
DO Low Control #2 Relay Disabled
DO High Alarm 8.90
DO High Alarm Relay Disabled
DO Low Alarm 7.70
DO Low Alarm Relay Disabled
DO Alarms No
Parameters—ORP
ORP Enabled
ORP Set Point 400mV
ORP High Control 425mV
ORP High Control Relay Disabled
ORP Low Control 375mV
ORP Low Control Relay Disabled
ORP High Alarm 435mV
ORP High Alarm Relay Disabled
ORP Low Alarm 300mV
ORP Low Alarm Relay Disabled
ORP Alarms No
Parameters—pH
pH Enabled
pH Cal 2 point
pH Set Point 7.00
pH High Control 7.50
pH High Control Relay Disabled
pH Low Control 6.50