YSI 5200 - Manual (Page 37)

YSI Incorporated 35 5200 Recirculating System Monitor
5.3 Parameters Menu
The Parameters Menu allows you to enter the menu for specific measurement parameters. In addition to
establishing Set Points, Control Points and Alarms, the Parameters menu also enables the user to perform
calibrations (refer to Section 6 Calibration for calibration routines). The majority of the day-to-day
operations of the YSI 5200 will be accessed through this menu.
The options in this menu include:
Ö DO System
Ö pH System
Ö ORP System
Ö Temperature System
Ö Conductivity System
Ö Salinity System
Ö Auxiliary System
Param eters Menu
Salanity DO Menu ORP Menu Cond Menu Tem p Menu pH Menu AUX Menu
Enable System
(Yes/No)
Save Changes
Figure 5-2 Parameters Menu
5.3.1 Entering Setpoint and Range Values
Various Set Points and ranges must be established for each of the five monitoring parameters that are
enabled: conductivity, temperature, pH, ORP and DO.
Ö The optimal Set Point value.
Ö The control range, or High and Low Set Points.
Ö The alarm range.