Reset, Reset to factory, System test – YSI 5200 User Manual
Page 87
Advertising
YSI Incorporated
85
5200 Recirculating System Monitor
Reset
After the set number of days has passed and the Clean Probes message appears on the display, it must be
reset.
Reset to Factory
CAUTION: Reset to Factory returns all the settings to the factory default values (see Section 16 Factory
Default Settings). All calibration values, alarms, set point values and control functions will be lost. If
you are sure you want to return to the factory settings, proceed as follows:
System Test
Use System Test to verify that each control system is working correctly. See Section 5.5 Conducting a
System Test for details.
Advertising