Extron Electronics JMP 9600 User Guide - Manual (Page 111)

Ethernet
Connection
This section provides a high level discussion of the Ethernet connections on the player and a
primer on the subject of subnetting. Topics that are covered, include:
• Ethernet Link
• Subnetting — A Primer
Ethernet Link
The rear panel Ethernet connector on the switcher can be connected to an Ethernet LAN or
WAN (see
item g and “ LAN Ports ” in the “Installation” section).
Default IP Address
To access the media player via the LAN port, you need the IP address of the player. If the
local system administrators have not changed the value, the factory-specified default IP
addresses are as follows:
LAN 1: 192.168.254.254 LAN 2: 192.168.254.253
Ping can also be used to test the Ethernet link to the media player.
105 JMP 9600 Media Player • Ethernet Connection