Extron Electronics JMP 9600 User Guide - Manual (Page 44)

Opening the Embedded HTML Pages
Access the player using HTML pages as follows:
1. Start the web browser program.
2. Click in the Address field of the browser.
3. Enter the IP address of the connected port in the Address field of the browser.
NOTE: • If the local system administrators have not changed the value, the
factory-specified default IP addresses are as follows:
LAN 1: 192.168.254.254 LAN 2: 192.168.254.253
• To access the stand-alone MSVPP page, enter
<IP address>/msvpp.html , where “ msvpp.html ” is case sensitive.
4. Press the keyboard <Enter> key. The player downloads the Player Control page (see
figure 35) (or the MSVPP page if you accessed it as described in the NOTE above).
Player Control Page
The Player Control page (figure 37) is the default startup page, appearing when you initially
download the web pages from the player. If you are on the Playlist Editor page
(see
figure 40 ), click the Player Control link at the top right of the page.
The Player control page consists of the Channel Control panel (transport
controls) and the Media Browser panel.
Channel Control Media Browser
Figure 35. Player Control Page
The Player Control page continually updates itself to display the latest status of the clip or
playlist that is loaded.
JMP 9600 Media Player • HTML Operation 38