Extron Electronics JMP 9600 User Guide - Manual (Page 26)

Loop selection
In Loop mode, the player runs the selected playlist or clip file in a continuous loop,
automatically starting the presentation over again once it ends. To toggle Loop mode
on and off, rotate the encoder knob to highlight (box) the Loop selection and press the
Enter button.
Mute selection
To toggle audio mute on and off, rotate the encoder knob to highlight (box) the
Mute selection and press the Enter button. Mute disables the audio output from all 16
audio channels when the media player is in 1-channel mode. Mute disables audio
channels 1 through 8 for video channel 1 and audio channels 9 through 16 for video
channel 2 when the media player is in 2-channel or 2-channel locked mode.
NOTE: Audio is unmuted (is output) when power is cycled.
Settings menu
The Settings menu (see figure 14) provides submenus to control the behavior of the player
and how it interacts with the connected audio/video systems and the network. Rotate the
encoder knob to highlight the desired submenu and press the Enter button.
Figure 14. Settings Menu
NOTE: Figure 14 is not an accurate image of the Settings menu. The figure is
elongated to show all selections in the menu. On the media player, the Video
selection is not visible until you rotate the Encoder knob to scroll down the
menu.
To return to the Settings menu from any of its submenus, press the Previous button.
JMP 9600 Media Player • Operation 20