Extron Electronics JMP 9600 User Guide - Manual (Page 21)

Transport Buttons
d Play/Pause ( ) button — Press this button to start the currently selected CPL or clip
file or pause a currently playing presentation while leaving the image displayed.
e Stop ( ) button — Press this button to stop the currently playing presentation. When
you press Play again, the presentation starts over from the beginning.
f Previous clip ( ) button — Press this button to load the previous CPL or clip file in
the playlist. The button has no function if no playlist is loaded (using the menu controls).
g Frame mode button ( ) — Press this button and then rotate the encoder knob
( item m ) to step frame-by-frame through the CPL or clip file while the player is in play
mode.
h Shuttle mode ( ) button — Press this button and then rotate the encoder knob
( item m ) to “shuttle” backwards and forwards through the CPL or clip file, at a rate
controlled by the encoder knob.
NOTE: The audio portion of the clip is active only when the playback speed is +1.0
(normal forward speed).
i Next clip ( ) button — Press this button to load the next CPL or clip file in the
playlist. The button has no function if no playlist is loaded (using the menu controls).
LCD and Menu Controls
j LCD screen and confidence monitor — The LCD display the user interface for local
control. The screen can also display a presentation as the player outputs it on its video
output connectors. The alpha-blend feature allows you to display a mix of the video that
is playing and the user interface simultaneously.
k Previous button — Press this button to return to the previously displayed menu or
page.
l Enter button — Press this button to initiate or activate a selected function.
Encoder knob
m Encoder knob — Rotate this knob to navigate the menu system. Rotate this knob
when frame mode and shuttle mode are selected to operate those features.
JMP 9600 Media Player • Operation 15