Extron Electronics JMP 9600 User Guide - Manual (Page 119)

Digital I/O control
Number/type .................................. 4 digital inputs
4 relay outputs
(2) 12 VDC outputs
Connectors
Digital inputs ........................... (2) 3.5 mm captive screw connectors, 4 pole
Relay outputs ........................... (3) 3.5 mm captive screw connectors, 4 pole
Power ...................................... (1) 3.5 mm captive screw connector, 4 pole
Pin configurations
Digital inputs ........................... Pins 1, 3, 5, 7 = positive; pins 2, 4, 6, 8 = negative
Relay outputs ........................... Pins 1, 4, 7, 10 = closed; pins 2, 5, 8, 11 = GND; pins 3, 6, 9, 12 = open
Power ...................................... Pins 1, 2 = +12 VDC; pins 3, 4 = GND
Digital inputs
Input voltage range ................. 5 to 24 VDC (with external current limiting resistor)
Input current range .................. 5 to 20 mA
Digital output contact rating .......... 1 A, 24 VDC, maximum
General
Power supply* ................................ Internal
Input: 100-240 VAC, 50-60 Hz
*A redundant power supply is included.
Power consumption ....................... 70 watts
Temperature/humidity .................... Operating: +50 to +104 °F (10 to +40 °C) / 10% to 90%, noncondensing
Cooling .......................................... Fan. Air flows in from the front and out through the vents in the two sides, as
viewed from front panel.
Thermal dissipation ........................ 239 BTU/hr
Mounting
Rack mount ............................. Yes, with included brackets
Enclosure type ................................ Metal
Enclosure dimensions ..................... 3.5" H x 17.0" W x 15.5" D (2U high, full rack wide)
8.9 cm H x 43.2 cm W x 39.4 cm D
(Depth excludes connectors and handles. Width excludes rack ears. Width with
rack ears is 19.0" [48.3 cm].)
Product weight ............................... 23 lbs (10.4 kg)
Shipping weight ............................. 28 lbs (13 kg)
Vibration ........................................ ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety ...................................... CE, NRTL
EMI/EMC ................................. CE, FCC Class A
MTBF ............................................. 30,000 hours
Warranty ........................................ 3 years parts and labor
NOTES: • All nominal levels are at ±10%.
• Specifications are subject to change without notice.
JMP 9600 Media Player • Reference Information 113