Reference information, Specifications, Content/file format – Extron Electronics JMP 9600 User Guide User Manual
Page 117: Video processing, Video output
Reference
Information
This section discusses the specifications, part numbers, and accessories for the
JMP 9600 Media Player. Topics that are covered include:
•
•
Specifications
Content/file format
File types ........................................ MXF-wrapped JPEG 2000 in DCP (Digital Cinema Package, unencrypted)
Video formats
JMP 9600 HD models .............. 1280x720p
5,6,7,8*
, 1920x1080i
2,3
1
= at 24 Hz,
2
= at 25 Hz,
3
= at 29.97 Hz,
4
= at 30 Hz,
5
= at 48 Hz,
6
= at 50 Hz,
7
= at 59.94 Hz,
8
= at 60 Hz (*at 4:2:2 only)
JMP 9600 2K models ............... 1280x720p
5,6,7,8
1920x1080i
2,3,4
, 1920x1080p
1,2,3,4,5,6,7,8
, 2048x1080
1,2,3,4,5,6,7,8
1
= at 24 Hz,
2
= at 25 Hz,
3
= at 29.97 Hz,
4
= at 30 Hz,
5
= at 48 Hz,
6
= at 50 Hz,
7
= at 59.94 Hz,
8
= at 60 Hz
Audio formats ................................ 16, 20, or 24 bits, 48 kHz broadcast WAV
NOTE:
1080p signals (1920 and 2048) at rates of 48 Hz and above are dual link HD-SDI only.
Video processing
Processing ...................................... 8, 10, or 12 bits per color channel
Data rates ...................................... Playback at up to 250 Mbps (125 Mbps per video channel in 2 channel mode)
Standards ....................................... ISO/IEC 15444-1 JPEG 2000, 32x32 codeblock
Video output
Number/signal type ........................ 1 dual link HD-SDI in 4:4:4 or 2 single link HD-SDI in 4:2:2
and
2 DVI or RGBHV in 4:2:2
Connectors .................................... 2 female BNC
2 female DVI-I
Nominal level ................................. 0.7 Vp-p for RGB
Minimum/maximum levels .............. 0.0 V to 1.0 Vp-p for RGB
Impedance ..................................... 75 ohms for RGB
Resolution ...................................... Follows input file format
Standards ....................................... Analog RGB, Y Pr Pb output: SMPTE 274M, SMPTE 296M
DVI output: SMPTE 274M, SMPTE 296M
HD-SDI output: SMPTE 292M (single link), SMPTE 372M (dual link)
Frame rate ...................................... Follows the file format.
111
JMP 9600 Media Player • Reference Information