Extron Electronics JMP 9600 User Guide - Manual (Page 86)

Loading and Updating firmware
NOTE: The media player must run firmware version 2.06.07 or newer to properly
update to even newer versions. If you have version 2.06.06 or older, you must
update to 2.06.07 before updating to any later version. See “
About menu “ in
the “Operation” section to determine your firmware version.
Acquire firmware upgrades and upload them to the media player as follows:
1. Visit the Extron website, www.extron.com , click the Download tab, and then click the
Firmware link (see a on figure 64).
3
2
3
1
1
NOTE: The file name, part number,
version, release date, and size
shown are sample values only.
Figure 64. Location of Firmware Upgrade Files
2. Select the appropriate firmware file (JMP 9600) to download and click Download ( b ).
3. Enter the requested personal information and then click Download to copy the firmware
to your computer ( c ).
4. Click Run on the next two screens (see d on figure 65 on the next page). The
PC downloads the firmware update from the Extron website and starts the Extron
Installation Program to extract the firmware file.
5. Click Next ( e on figure 65). The program extracts the firmware files and places them in
a folder identified in the InstallShield Wizard window.
NOTE: Note the folder to which the firmware file is saved.
6. Click Finish to exit the program ( f on figure 65).
JMP 9600 Media Player • Detailed System Interaction 80