Extron Electronics JMP 9600 User Guide - Manual (Page 18)

Power
NOTE: Although the unit performs reliably while running on a single AC power supply,
doing so defeats the dual-redundant power supply feature.
l Dual Redundant AC Power Input connectors —
Connect a standard IEC power cord between one rear panel
AC Power Input connector and a 100 to 240 VAC, 50-60 Hz
power source.
Connect a second IEC power cord between the remaining AC
Power Input connector and either an uninterruptible power
source or a power source that is completely independent from
the primary power source.
WARNING : Physically disconnect both power cables from the player before opening
the case for servicing.
m Dual Redundant AC Power Input switches — Toggle both AC Power Input switches
to the on ( ) position.
JMP 9600 Media Player • Installation 12