Ping function, Figure 23 – Extron Electronics JMP 9600 User Guide User Manual

Page 34

Advertising
background image

Ping function —

Use the Ping function to ‘ping’ another device on the network as follows:

1.

Rotate the encoder to highlight the

Ping IP

selection (see

a

on figure 23).

ENTER

3

4

1

5

ENTER

6

2

Figure 23.

Ping Function

2.

Press the Enter button (

b

).

3.

Rotate the encoder to highlight the first or next octet that needs to be changed (

c

).

4.

Press the Enter button.

5.

Rotate the encoder to change the selected octet to the desired value (

d

).

6.

Press the Enter button. The highlight jumps to the next octet.

7.

Repeat steps 3 through 6 as necessary to change all octets.

8.

Press the Enter button.

9.

Rotate the encoder as necessary to highlight the

Ping

control (

e

).

10.

Press the Enter button (

f

).

Player submenu

The Player submenu provides a tool to give the player a unique name and location
(see figure 24).

ENTER

3

4

1

5

2

PREV

Figure 24.

Player Submenu and Keyboard

Customize the player as follows:

1.

Rotate the encoder to highlight the identifier, either Name or Location (see

a

figure 24).

2.

Press the Enter button (

b

). An alphanumeric keyboard screen appears.

3.

Rotate the encoder to highlight the first or next character in the identifier (

c

).

NOTES:

•

is the back space key. Pressing Enter when this key is highlighted,

erases the character to the left of the cursor.

•

is the Caps key. Pressing Enter when this key is highlighted, toggles

the keyboard between uppercase and lowercase characters.

•

is the space key.

JMP 9600 Media Player • Operation

28

Advertising