Extron Electronics JMP 9600 User Guide User Manual
Page 23
Channel status menus
NOTES:
•
Channel 2 Status is displayed in the main menu (figure 10) and available for
selection only in 2-channel output mode and 2-channel locked output mode,
both of which can be selected in the
.
•
The Channel 1 Status and Channel 2 Status are identical, except where noted.
Figure 11 shows an overview of the Channel Status screen and the available settings.
Figure 11.
Channel Status Menu
The LCD shows the current state of the channel 1, including the loaded clip and playlist (if
applicable) and whether the presentation is playing, paused or stopped. The screen also
shows two counters and a static display that display the time of specific functions of the
time as hour:min:sec:frame:
Tc (Timecode) — The Timecode counter shows the current point in time within the loaded
program. The Timecode counter includes the pre-roll, roll, and post-roll periods.
Lock indicator (
) — The lock indicator, when displayed, indicates the video that is
playing is synchronized with an external genlock signal.
Fr (Frame) — The Frame counter shows the current point in time within the currently
loaded playlist or clip; the roll period only.
Dur (Duration) — The Duration display shows the entire run-time of the currently loaded
playlist or clip. This is a static display only.
NOTE: The frame field of the Tc and Fr counters is not updated during playback; only
the hour:min:sec fields are active. The Time count and Frame counters show the
frame number when paused, in Frame mode, or in shuttle mode.
JMP 9600 Media Player • Operation
17