Extron Electronics JMP 9600 User Guide - Manual (Page 82)

Detailed System
Interaction
This section describes the interaction of the media player and other system components at a
detailed level, including:
• Data Transfer and Firmware Upgrade
• Synchronization
• Using Digital Inputs and Relays
• Encoding Guidelines
Data Transfer and Firmware Upgrade
NOTE: The media player must run firmware version 2.06.07 or newer. If you have an
older version (see “ About Setup Dialog Box “ in the “Operation” section
to determine the firmware version), update the firmware to ensure proper
operation.
Program content and firmware upgrades can uploaded to the media player using the either
LAN port and a reliable File Transfer Protocol (FTP) utility. Extron has tested the FileZilla FTP
utility (
www.filezilla-project.org/ ) with the JMP 9600:
NOTE: The procedures in this guide are shown using the FileZilla FTP utility. Other FTP
utilities can be used, but the appearance and exact procedure may vary.
Starting the FileZilla FTP Utility
1. Connect a computer that runs the Windows operating system to either media player
LAN port (see “
LAN Ports ” on page 9), either directly or via a network.
2. Start FTP utility (see figure 60).
4 3 2 1
Figure 60. FileZilla FTP Utility
JMP 9600 Media Player • Detailed System Interaction 76