Alpha Technologies AlphaGen PN-6x-T 7.5kW 48VDC - Technical Manual - Manual (Page 39)

042-288-B0-001, Rev. A 39
3.0 Installation, continued
3.3 PN-6x-T 7.5kW Installation, continued
3.3.1 PN-6x-T 7.5kW Transportation and Lifting, continued
The enclosure is lifted via four lifting plates included with the generator. The lifting
plates are attached to the cabinet with 1/4-20 x 3/8" stainless steel SAE J429 Grade
8 hex-head bolts, torqued 80 to 90 in-lbs.
Fig. 3-10, Enclosure with Lifting Ears Installed, PN-6x-T 7.5kW
To prevent injury or death, do not walk, or allow personnel to walk, beneath the suspended
unit. Use steel-toe work shoe protection. Use hard hats at all times during this procedure.
Before lifting, verify the transport path is clear of obstructions.
WARNING!
Front View Side View
Spreader Bar