B&K Precision 4040B - Manual - Manual (Page 28)

28
After selecting the TRIGGERED, GATED, or BURST
menu, the trigger source menu is available:
Trigger Menu
F1: Manual
– Selects manual as the trigger source. To
trigger the waveform generator,
press this MANUAL trigger button again.
F2: Internal
– Selects the internal trigger generator as
the trigger source. Change the
internal trigger rate displayed with the rotary input knob.
F3: External
– Selects the external trigger signal as the
trigger source. The trigger source
is supplied through the TRIG IN connector.
In BURST MODE, the F4 key displays N-Burst,
representing the number of burst cycles to output with