B&K Precision 4040B - Manual - Manual (Page 30)

30
Utility Menu
F1: Recall
– Recalls a previously stored front-panel
setup from the selected buffer. Change the buffer number
by using the rotary input knob. Valid storage buffer
numbers are from:
4014B: 1 to 9
4040B: 1 to 19
Buffer 0 is the factory default setup.
F2: Store
– Stores the current front-panel setup to the
specified storage buffer. Change the buffer number by
using the data keys or the rotary input knob. Valid
storage buffer numbers range from:
4014B: 1 to 9
4040B: 1 to 19
F3: Out-On Def
– Selects the OUTPUT state on power-
up. Select ON to enable or OFF to disable the output on
power-up.
F4: COUNTER
– Enables the built-in frequency counter.
The frequency of the signal connected to the TRIG IN
connector will be displayed. The counter is auto ranging
with up to 8 digits of resolution.