B&K Precision 4040B - Manual - Manual (Page 60)

60
-223 Too much data.
The arbitrary waveform memory limit
has been exceeded.
-224 Illegal parameter value.
The parameter value must be
selected from a finite list of possibilities.
Device-Specific Errors
An error specific to the device occurred.
-315 Configuration memory lost.
Device memory has been lost.
-330 Self-test failed.
-350 Queue overflow.
Error codes have been lost due to more than 10 errors
being reported without being read.
Query Errors
A query error indicates that the output queue control
has detected a problem. This could occur if either an
attempt was made to read data from the instrument if none
was available, or when data were lost. Data could be lost
when a query causes data to be formatted for the
controller to be read, and the controller sends more
commands without reading the data.
-410 Query INTERRUPTED.