B&K Precision 4040B - Manual - Manual (Page 67)

67
1) The MIN and MAX arguments refer to currently
settable minimum or maximum.
2) FIXed is alias for CW.
AMPLitude <p-p amplitude>
The amplitude command is used to set the peak-to-peak
amplitude of the output waveform. Note that the amplitude
and the offset are limited by the relation:
Peak Amplitude + |Offset| <= 5V
Arguments
Type:
Numeric
Units: V, mV, VPP, mVPP
Range: 10mV to 10V
Rounding: 1mV for 10mV to 999mV. 10mV for 1V to
10V.
Command Type: Setting or Query
Setting
Syntax:
AMPLitude<ws><amplitude>[units]
AMPLitude<ws>MINimum|MAXimum
Examples:
AMPL 2.5
AMPL 2.5V
AMPL MAX
Query
Syntax:
AMPLitude? <ws>MINimum|MAXimum]
Examples: AMPL?
AMPL? MAX
Response:
NR2
Considerations: