B&K Precision 4040B - Manual - Manual (Page 64)

64
Range: 0 to 9 (4014B) / 0 to 19 (4040B). Non
integer values are rounded before
execution
Type: Common Command
Syntax: *SAV<ws><NRf>
Example: *SAV 2
Stored setting location 0 stores the factory defaults, and is
a read-only location.
4.9 INSTRUMENT CONTROL
COMMANDS
Instrument control commands are grouped into logical
subsystems according to the SCPI instrument model. The
commands are comprised of mnemonics indicating the
subsystem to which the command belongs, and the
hierarchy within that subsystem. When the command is to
be referred to the Root node, it should be prefixed with a
colon (:). Mnemonics appearing in square brackets [...] are
optional. The '|' character is used to denote a choice of
specifications. The '<ws>' is used to denote a white space
character.
Note: When controlling the instrument remotely, do
not interrupt the instrument with front panel
interactions. Although the instrument will be
automatically changed back to LOCS (local) mode,
subsequent remote commands may cause errors
during communication, in which will require a need of