B&K Precision 4040B - Manual - Manual (Page 65)

65
restarting the instrument before continuing again with
remote operations.
4.9.1 Default Subsystem
The Source Subsystem controls the frequency, voltage,
amplitude modulation and clock source. The command
structure is as follows:
FUNCtion
SINusoid|SQUare|TRIangle|
FREQuency <numeric value>
AMPLitude <numeric value>
OFFSet <numeric value>
DCYCle <numeric value>
OUTPUT ON/OFF
MODULation
OFF/AM/FM/INT/EXT
DEPTh <numeric value>
MODFRequency <numeric value>
MODSHape SIN/TRI/ SQU
DEViation
<numeric value>
SWEep
ON/OFF/LIN/LOG
SWRAte <numeric value>
SWSTArt <numeric value>
SWSTOp <numeric value>
MODE
CONT/ TRIG / GATE / BRST
TRIG INT / EXT
TRAte <numeric value>
BURSt <numeric value>