B&K Precision 4040B - Manual - Manual (Page 38)

38
Table 1
– Power-on Default Settings
Key Function Value Description
Function Sine Output Waveform
Frequency 1.0000 kHz Waveform Frequency
Amplitude 5.00 V Peak-to-peak output
amplitude
Offset 0.00 V Zero DC offset
Output OFF Output disabled
Sweep OFF Sweep function disabled
Modulation OFF Modulation function disabled
N-BURST 2 Wave per burst for burst
mode
Trig Source Continuous Continuous trigger
Trig Rate 10 ms Internal trigger rate
3.11 Memory
The waveform generator uses non-volatile flash memory
for storing the front panel settings.
4014B: Up to 10 front panel settings can be stored
(includes storage location 0 for factory default settings).
4040B: Up to 20 front panel settings can be stored
(includes storage location 0 for factory default settings).
3.12 Displaying Errors
The waveform generator displays error messages when
front-panel settings are either invalid or may produce
unexpected results.