B&K Precision 4078 - Manual - Manual (Page 28)

value of the starting point and automatically calculated by the unit.
F4: EXEC - Prompts you to confirm whether to execute the selected predefined waveform.
Press NO to abort executing the predefined waveform; press YES to execute the predefined
waveform. On the NOISE function a menu of ADD and NEW is prompt to select a new noise
waveform or to add noise to the existing waveform.
F4: MORE
- Displays the following Menu:
Arbitrary Option Display
F1: COPY - Displays the Copy menu (see the Copy Function later in this section).
F2: CLEAR - Displays the Clear menu (see the Clear Function later in this section).
F3: PROT - Displays the Protect menu (see the Protect Function later in this section).
F4: SHOW WAVE - Display the Arbitrary waveform in full screen mode on LCD display. This
is only an approximated display for quick viewing. It does not represent the
exact waveform being generated. To return back to the MENU selection,
press any button.
Full Display Example
Copy Function. Copies an area of waveform memory to another area of waveform memory.
F1: FROM - Selects the address of the first point to copy.
F2: LENG - Selects the length (number of points) of the waveform to copy.
F3: TO - Selects the destination address where the first point is copied.
F4: EXEC - Prompts you to confirm whether to copy. Press NO to abort copying, YES to copy.
Clear Function. Clears (sets the data values to zero) either a section of or all of waveform memory.
F1: FROM - Selects the address of the first point to clear.