Lexibook CG1300 - Manual (Page 34)

34
the lights corresponding to the pawn captured en passant. Press this square
and remove the pawn from the chessboard.
CASTLING
In order to castle you need first of all to move the King as usual. Once you have
pressed the squares you want to move the King from and to, the computer will
remind you to move the Castle.
To castle short (castling with the King’s Castle) on the White side:
1. Press square E1 and pick up the King.
2. Place the King on G1 and press the square.
3. The computer will remind you to move the Castle by illuminating the
lights corresponding to H1. Press the H1 Square and pick up the Castle.
4. The computer will illuminate the coordinates of F1. Place the Castle on F1
and press this square.
To castle long (castling with the Queen’s Castle) on the White side:
1. Press square E1 and pick up the King.
2. Place the King on C1 and press the square.
3. The computer will remind you to move the Castle by illuminating the
corresponding square. Press A1 and pick up the Castle.
4. The computer will illuminate the coordinates of D1. Place the Castle on
D1 and press the square.
PROMOTING PAWNS
The computer automatically promotes pawns.
1. Press the square of the pawn you want to promote and pick up the piece.
2. Look for a Queen of the right colour among the captured chessmen (if
there is no Queen of the right colour available, you can use a Castle and
place it on the board upside down). Press the square you want the Queen
on and place the piece on this square.
The computer assumes that you will always choose a Queen when you promote
your pawns. If you want to promote your pawn to a Castle, a Bishop or a Knight,
you can do so by changing their positions (see paragraph XIX). The computer itself
will always promote its pawn to a Queen.
CG1300 -1350-F/GB/P/I/E 17/03/04, 10:20 34