Lexibook CG1300 - Manual (Page 53)

53
To change the level or setting, follow these instructions:
1. Press the LEVEL key on the computer to go to level selection. The computer
will illuminate the light corresponding to the current level (for example, square
A6 corresponds to level 1, setting L3, square G6 corresponds to level 1, setting
L6).
2. Consult the table above to find out the square corresponding to the level and
setting you want. Press this square.
3. Press the LEVEL key again to exit level selection. Then begin playing with
your first move, or press MOVE to let the computer go first.
If you want to check which level and setting is selected without changing them,
follow this procedure:
1. Press the LEVEL key. The computer will show the current level by illuminating
the lights of the square corresponding to the level and the timer shows the game
setting.
2. Press LEVEL a second time to return to the game.
You can change or verify the level at any moment of the game when it’s your turn
to move.
X. MAINTENANCE
Your chess computer needs very little maintenance. These instructions will help
you keep it in good condition for many years:
Keep away from damp. If the computer gets wet, wipe dry immediately. Do not
leave in direct sunlight, do not expose to heat. Handle with care. Do not drop. Do
not try to dismantle. To clean, unplug the adapter, use a damp cloth. Do not use
detergent. In case of malfunction, first replace the batteries. If the problem persists,
re-read instructions carefully to ensure you have not overlooked anything.
CG1300 -1350-F/GB/P/I/E 17/03/04, 10:20 53