Operations to be carried out on the thermodynamic, Dhw tank – DE DIETRICH KALIKO TWH 200E - TWH 300E - TWH 300EH User Manual
Page 35
Advertising
4.8.2.
Operations to be carried out on the
thermodynamic DHW tank
1. Unscrew the 2 screws.
2. Remove the front cover.
3. Separate the control system command module from its base.
4. Disconnect the command module (2 wires).
5. Unscrew the 2 fastening wires on the base.
6. Remove the wire and discard it.
7. Unscrew the 2 fastening screws on the base of the control panel
and remove the base.
C003254-C
1
1
2
6
4
3
5
C003329-D
7
C003408-D
TWH 200E TWH 300E TWH 300EH
4. Installation
03/02/2014 - 300026515-001-03
33
Advertising