Burkert Type 2012 - Manual (Page 28)

28
Partsorder
Type 2000, 2002, 2012
9 paRTs oRdeR
Caution!
Risk of injury and/or damage by the use of incorrect parts!
Incorrect accessories and unsuitable spare parts may cause injuries and damage the device and the sur-
rounding area.
▶ Use original accessories and original spare parts from Bürkert only.
9.1 Replacement part sets
The following replacement part sets are available for the angle seat valve Type 2000:
• Valve set
consists of swivel plate, pin and graphite seal.
• Seal set for actuator
consisting of the sealing and wearing parts of the actuator.
Valve set for globe valve type 2002 on request.
9.1.1 seal set pa actuator
Seal set SET 5 PA actuator:
actuator size matching valve sizes order no.
(red bronze body)
order no.
(stainless steel body)
C (ø 40) DN 20/25 233 587 233 587
D (ø 50) DN 20/25 233 588 233 588
E (ø 63) DN 25-50 233 591 233 591
F (ø 80) DN 25-65 233 593 233 593
G (ø 100) DN 32-65 007 763 011 386
H (ø 125) DN 40-65 011 368 011 387
Table 4: SET 5 – PA actuator
9.1.2 seal set pps actuator
Seal set SET 5 PPS actuator:
actuator size matching valve sizes order no.
(red bronze body)
order no.
(stainless steel body)
C (ø 40) DN 20/25 233 581 233 581
D (ø 50) DN 20/25 233 582 233 582
E (ø 63) DN 25-50 233 583 233 583
F (ø 80) DN 25-65 233 584 233 584
G (ø 100) DN 32-65 011 374 011 389
H (ø 125) DN 40-65 007 764 007 768
Table 5: SET 5 – PPS actuator
english