General information, Contact addresses, Warranty – Burkert Type 2012 User Manual
Page 7: Information on the internet, Reengineering, Auxiliary materials, 3general information, 1 contact addresses, 2 warranty, 3 information on the internet
7
Generalinformation
Type 2000, 2002, 2012
3
GeneRal infoRmaTion
3.1
contact addresses
germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: [email protected]
international
Contact addresses are found on the final pages of the printed operating manual.
You can also find information on the Internet under:
3.2
Warranty
The warranty is only valid if the device is used as authorized in accordance with the specified application
conditions.
3.3
information on the internet
The operating instructions and data sheets for Type 2000, 2002 and 2012 can be found on the Internet at
3.4
Reengineering
Reengineering of this product changes the spare parts. The spare part sets include all spare parts for both valve
versions. The reengineered valves are identified by the letter “R” (see the first line of the type label).
3.5
auxiliary materials
The following auxiliary materials are recommended for conversion and repair in these instructions:
type of auxiliary
material
auxiliary materials
manufacturer’s information
Sealer and anti-seize agents
Silicone grease OKS 1110-3
OKS Schmierstoffe GmbH
www.oks-germany.com
Lubricating paste
Klüber paste UH1 96-402
Klüber Lubrication München
www.klueber.de
Lubricant
Amblygon TA
Klüber Lubrication München
www.klueber.de
Liquid adhesive
Loctite 274
Henkel Loctite Deutschland GmbH
www.loctite.de
english