Hach-Lange ORBISPHERE 6110 User Manual - Manual (Page 29)

27
Section 4 User Interface and Startup
4.1 User interface
4.1.1 Turning the instrument ON and OFF
The instrument has a power switch located at the rear of the left side of the base (No. 2 in
Figure 3 on page 16 ). The LED on the instrument measurement start button (No. 5 in Figure 2
on page 15 ) is illuminated when the instrument is powered on.
Important Note: It is recommended to keep the instrument powered ON at all times, unless the
instrument is to be moved to another location, if it will not be used for a long period of time, or if
maintenance procedures need to be carried out inside the instrument.
4.1.2 Touch screen
The instrument front panel is comprised of a TFT VGA (640x480) color display touch screen
acting as display, touch pad and keyboard.
4.1.3 Data entry
When a text box (alphanumeric field) is selected for data entry, a virtual keyboard appears on
screen as illustrated below. This is used in a similar way to a standard PC keyboard.
Once values have been entered, press the (Enter) key on the right of the keyboard to
confirm input and exit the virtual keyboard.
Note: Use the Cap key at the bottom left of the keyboard to switch between upper and lower case
characters. This is important for case-sensitive information such as passwords.