Hach-Lange ORBISPHERE 6110 User Manual - Manual (Page 41)

39
Configuration
5.5.3 Audit trail
5.6 Communication
This option sets the parameters required for exporting instrument data files to your PC or USB
storage device.
Select from:
• Data download configuration (see below)
• Ethernet configuration (see Ethernet configuration on page 40 )
5.6.1 Data download configuration
Scroll through the list of available data files using the up/down arrow keys on the right, and
select if the file to be exported is in data or text format. By default, the text format is set to YES
and the data format to NO. Set both formats to NO if you do not require the file downloaded.
Use the Invert Selection button under each column to toggle between YES and NO.
Note: It is recommended to set the files to text format for easy loading into standard software applications
on the PC such as Microsoft Excel or similar. The data format is only required for Hach Lange service and
support personnel.
When the data formats have been configured, select Ok to confirm.
The following files can be transferred:
• Audit trail: Audit trail.txt
• Calibration files: Calib Barometer.txt, Calib CO2.txt, Calib Flow.txt, Calib O2.txt,
Calib Pressure.txt and Calib Temperature.txt
• Liquid: Liquid.txt
• Package: Package.txt
• Result: Result.txt
• Configuration: Configuration.txt
• Formula: Formula.txt
• Raw data: Raw data.txt
To transfer the data files, plug an external mass storage device (such as a USB memory stick)
into the USB-A port at the rear left of the instrument (No. 3 in
Figure 3 on page 16 ). The
instrument should automatically recognize the presence of the device.
It may be that some USB memory sticks are not compatible with the instrument and will not be
recognized. In this case, the only solution is to try another brand of memory stick, or to access
the instrument using an Ethernet connection (see
Ethernet configuration on page 40 ).
Note: It is recommended to use an empty USB storage device, as the more files it contains the longer the
instrument will take to scan the device for files already downloaded.
The files are automatically copied and on completion a pop-up window will inform you the
process completed successfully and you can remove the device.
Remove the device and press YES in the pop-up window to continue, followed by EXIT in the
main window to complete the process.
Next, insert the device into an available USB port on your computer and download the data to
an appropriate folder using standard computer software.
Audit trail
View the list of user actions performed on the instrument. The actions are listed chronologically with the
latest action always at the top of the list. When the maximum of 1,000 recorded actions is reached, the
oldest is deleted and replaced with the newest.
Scroll through the audit trail screens using the First, Previous, Next and Last buttons, or select the Exit
button to leave this option.
Note:
To clear the audit trail file, use the option available in Security management.