Adaptec 48300 - Manual (Page 35)

Installing the Driver ●
35
8 Proceed with the Linux installation according to the Red Hat or
SuSE instructions.
Installing the Module in an Existing Linux System
To install the module in an existing Red Hat or SuSE Linux system:
1 Insert and mount the RAID Installation CD.
2 Install the module RPM by typing:
rpm -Uvh mount-point/xxx/yyy.rpm
where mount-point is the specific mount point on the Linux system,
xxx is the driver path, and yyy.rpm is the rpm file.
3 Reboot your computer to complete the installation.
4 Run fdisk , mkfs , and create mount points for any new drives.