Adaptec 48300 - Manual (Page 52)

Using the Adaptec RAID Configuration Utility ●
52
Deleting Arrays
Caution: Back up the data on an array before you delete it.
Otherwise, all data on the array is lost. Deleted arrays cannot be
restored.
To delete an existing array:
1 From the ACU menu, select Manage Arrays.
2 Select the array you wish to delete, then press Delete.
3 In the Array Properties dialog box, select Delete then press Enter. A
warning message appears.
4 If you press Yes, select the member when the following prompt is
displayed:
To delete the partition table, choose which member:
member #0, member #1, both, none
5 Press Esc to return to the previous menu.
Adding/Deleting Hotspares
Select the Add/Delete Hotspare option to add, delete, or view
hot spares.
1 From the ACU menu, select Add/Delete Hotspare.
2 Use the up and down arrow keys to highlight the disk you want to
designate as a Hotspare, then select Insert>Enter.
3 Press Yes when the following prompt is displayed:
Do you want to create a spare? (Yes/No)
The Spare you have selected appears in the Selected Drive menu.
!