Adaptec 48300 User Manual
Page 46
Managing Your Storage Space
●
46
11
On the next screen, respond as follows:
The Creating Array window is displayed.
Note:
RAID 1 and RAID 10 clearing is not available to the operating
system until clearing operation is complete.
12
Press Enter to continue with the array configuration.
Note:
You can start using the array now. But, for a RAID 1,
performance is reduced until the build process is complete.
13
Press Esc until the Exit Utility window is displayed.
14
Highlight Yes, then press Enter.
The computer restarts.
Create the driver disk and install the driver as described in
.
Array Type
Select a RAID type, then press Enter.
Array Label
Type a name of no more than 15 characters, then
press Enter.
Stripe Size
Select stripe size, then press Enter. (N/A for RAID
1.)
Create RAID via
Select RAID option, then press Enter. (No Init and
Migrate are the only options for RAID 0.)
[Done]
Press Enter.