Adaptec 48300 - Manual (Page 72)

Using the Command Line Utility ●
72
Command
hrconf create
What it does
Creates logical drives. You must provide the channel and device ID of
the physical drives. On redundant logical drives, HRCONF performs
autosynchronization.
Syntax
hrconf create <Controller#> LOGICALDRIVE
[Options] <Size> <RAID#> <CHANNEL# DRIVE#>
[CHANNEL# DRIVE#] ... [noprompt]
Parameters
Controller# is the controller number
Logicaldrive indicates the logical drive stripe size with the
following options:
● Stripesize: Optional parameters for specifying a stripe size.
STRIPE is specified in kilobytes: 16, 32, and 64 are supported.
● Name: Optional parameter for specifying the name of the logical
drive to be created.
● Init_Priority: Initialization Priority for logical drive to be
created. Valid parameters are either HIGH, MED, or LOW.
● Init_Method: Initialization method for the logical drive. Valid
options include: NORMAL, CLEAR, QUICK.
Size indicates the size of the logical drive. MAX is the only size
option available.
RAID# indicates the RAID level for the logical drive (0, 1, 10 volume).
Channel# is the channel number for the device.
Drive# is the device number for the device.
noprompt: No prompt for confirmation.