Adaptec 48300 - Manual (Page 63)

Adaptec Flash Utility (AFU) ●
63
3 Select Select Controllers and select the Adaptec HostRAID
controllers to be flashed. When selecting a single controller, the
system automatically selects it. When selecting multiple controllers,
use the space bar, then press Enter.
4 Select Select an Operation and choose one of the available options.
Then follow the on-screen instructions.
Running the AFU from the Command Line
At the DOS command prompt (typically A:\> ), type AFU followed by a
command and any switches. The AFU processes the command,
prompts you to insert additional floppy disks as needed, exits, and
reports success or an error message code. The available commands are
summarized below, in alphabetical order.
HELP
The HELP command displays a summary of AFU functions and
command switches.
Examples
The following are examples of command syntax that will work to get
help:
A:\> AFU HELP
A:\> AFU /?
LIST
The LIST command displays the AFU-supported HostRAID controllers
installed on your computer. Use this command to see which HostRAID
controllers are installed, or to identify the ID numbers assigned to each
physical controller.
You do not have to restart the computer after completing this command.