Adaptec 48300 - Manual (Page 69)

Adaptec Flash Utility (AFU) ●
69
c Updating the Flash on All HostRAID Controllers
Simultaneously—To flash the firmware on all HostRAID
controllers, type:
afu update /C all
Note: The UFI file identifies the appropriate HostRAID
controllers, so you do not have to worry about flashing the
wrong controller.
7 The AFU prompts you to put in the first firmware disk.
When it detects that the disk is in the drive, the AFU reads the part
of the firmware image contained on the first disk.
8 When prompted, remove the first firmware disk and insert the
second firmware disk.
9 If necessary, repeat Step 8 until the process is complete.