Adaptec 48300 - Manual (Page 78)

Using the Command Line Utility ●
78
Return values
SUCCESS: 0x00 indicates the command completed successfully
FAILURE: 0x01 indicates the command failed
Command
hrconf setconfig
What it does
Resets the controller's configuration.
Syntax
hrconf setconfig <Controller#> DEFAULT
[noprompt]
Parameters
Controller# is the controller number
Default: Resets the controller's configuration. Logical drives are
deleted, hard drives are reset to the ready state, and any controller
settings are reset to default values.
noprompt: No prompt for confirmation.
Example
hrconf setconfig 1 default noprompt
Return values
SUCCESS: 0x00 indicates the command completed successfully
FAILURE: 0x01 indicates the command failed
Command
hrconf setstate
What it does
Redefine the state of a physical device from its current state to the
designated state (Hotspare).