Adaptec 48300 - Manual (Page 74)

Using the Command Line Utility ●
74
Command
hrconf getconfig
What it does
Lists information about the controllers, logical drives, and physical
drives. This information can include (but is not limited to) the
following items:
● Controller type
● BIOS, boot block, device driver, and firmware versions
● Logical drive status, RAID level, and size
● Physical drive type, device ID, presence of PFA
● Physical drive state
Syntax
hrconf getconfig <Controller#> [AD/LD/PD/AL]
Parameters
Controller is the controller number
AD/LD/PD/AL options:
● AD: Adapter information only
● LD: Logical drive information only
● PD: Physical device information only
● AL: All information (optional)
Example
hrconf getconfig 1 ad
Return values
SUCCESS: 0x00 successful termination
FAILURE: 0x01 bad arguments or internal error