Adaptec 48300 - Manual (Page 55)

Using the Adaptec RAID Configuration Utility ●
55
Using SerialSelect
The SerialSelect utility allows you to change the BIOS and HostRAID
controller and device settings without opening the computer cabinet.
For information on the SerialSelect options, see SerialSelect Options on
page 56 . To access SerialSelect:
1 Restart the computer, then press Ctrl+A when prompted to access
the Adaptec RAID Configuration utility.
2 If multiple HostRAID controllers are installed, select the HostRAID
controller you want to configure, then press Enter.
3 From the ARC menu, select SerialSelect Utility.
To select a menu option, browse with the arrow keys to the option,
then press Enter. In some cases, selecting an option displays another
menu. You can return to the previous menu at any time by pressing
Esc.
To restore the original SerialSelect default values, press F6 from
within the SAS Driver and Controller Configuration screens.
4 To exit SerialSelect, press Esc until a message prompts you to exit (if
you changed any settings, you are prompted to save the changes
before you exit).
5 At the prompt, select Yes to exit, then press any key to restart the
computer. Any changes you made in SerialSelect take effect after the
computer restarts.