Aerobell 168 - maintenance – Ransburg Aerobell 168 A12787 User Manual
Page 66
Advertising
Aerobell 168 - Maintenance
63
LN-9270-12.3
MAINTENANCE DISASSEMBLY PROCEDURES
(30mm Bell Cup and Shape Air Ring)
Step 3
Locate the Cup Wash Fitting
that is mounted on the Shape
Air Ring.
Step 4
Remove the Cup Wash Fitting
from the Shape Air Ring.
When assembling the Cup
Wash Fitting, tighten with fin-
gers until an audible “click” is
heard.
Note: Be careful not to drop the
Cup Wash Ferrule.
Make sure when assembling
the Cup Wash Fitting that the
ferrule taper end is inserted
into the Cup Wash Fitting.
Advertising